Leema-acoustics TUCANA II Handbook - Remote Control
Remote control
Power> The red power button turns the unit on from standby, or reverts to standby from power on. When powered on, the
volume ring will flash while the unit initialises then, if applicable, the previous input setting will be restored and the volume will
slowly rise to a low level. The fade up sequence can be overridden at any time by using either the volume control or the
remote control volume buttons.
Mute> Pressing the mute button once, while the system is playing, will cause the volume to rapidly fade to zero. A second
push of the button will restore the volume level.
Input> The input up and down buttons cycle through the available input sources, one-button push at a time. The audio mutes
for a fraction of a second between selections.
Volume> Two buttons, one for up and one for down, control the volume. If using a complete Leema system, the volume of
the Hydra and Cygnus will also change in step with the Tucana.
Remote control codes
The remote control format is Sony 12 bit. The following codes may be used to program universal remotes:
IR DEVICE = 16 (Amplifier)
IR COMMANDS:
0=CD, 1=TUNER, 2=AUX, 3=MULTI1, 4=MULTI2/MP3, 5=AV DIRECT, 6=TAPE, 7=BALANCED, 16=Input Up, 17=Input Down
18=Volume Up, 19=Volume Down, 20=Mute
Remote control
TUCANA II
11