Leema-acoustics TUCANA II Handbook - Tucana II
Rear Panel
TUCANA II
‘LIPS’ bus connectors
This allows communication
between various Leema
system components.
Loudspeaker Outputs
The speakers are connected here.
Ensure correct polarity:
Red terminal is +, Black terminal is -.
WARNING:
Do not make connections with unit
connected to the mains supply.
SHORTING THE LOUDSPEAKER
OUTPUTS WILL DAMAGE THE
AMPLIFIER
PRE-AMP Output
This output may be
used for subwoofers,
bi-amping or for bass
enhancement when
used with a Leema
Corvus.
Inputs
When a Tucana II is used in a
stereo system, all inputs CD to
MULTI 2, may be used to
connect stereo sources.
If the Tucana is part of a multi-
channel system, CD, TUNER
and AUX are used to connect
stereo-only sources.
MULTI 1 and MULTI 2 are the left
and right channels of multi-
channel sources, e.g. DVD
players etc.
AV DIRECT
The AV Direct input is
intended for connection of an
AV processor or similar.
WARNING:
Any source connected here
MUST have its own volume
control. When the AV input is
selected, the volume level is
preset. If a fixed level source
is connected here e.g. a CD
player, the resulting volume
level will be extremely high.
TAPE Input and Output
A tape recorder or PC audio card
may be connected here.
Power Inlet
Please ensure that the
specification indicated
adjacent to the connector
is correct for your area.
This will either be
230VAC or 115VAC.
6
OUT
IN
IN
IN
IN
IN
IN
IN
OUT
PRECISION AUDIO COMPONENT MANUFACTURED IN THE UNITED KINGDOM BY LEEMA ELECTRO ACOUSTICS LIMITED
230 VAC
50/60Hz
MAX 800W
DO NOT OPEN - NO USER
SERVICEABLE PARTS INSIDE
REFER TO QUALIFIED
SERVICE PERSONNEL
DO NOT EXPOSE THIS UNIT
TO RAIN OR MOISTURE
DO NOT USE IN
DAMP CONDITIONS
SERIAL No.:
THIS UNIT MUST BE EARTHED
LEFT
RIGHT
LEFT
RIGHT
FUSE RATINGS
230VAC - 5AT
115VAC - 10AT
CAUTION
VORSICHT
REMOVE POWER
BEFORE OPENING
VOR DEM ÖFFNEN
NETZSTECKER ZIEHEN
Balanced Inputs
Source equipment
having balanced outputs
may be connected here.