- DL manuals
- Legacy
- Two-Way Radio
- ML-3215
- Operating Manual
Legacy ML-3215 Operating Manual
Summary of ML-3215
Page 1
Proline series ml3215 / ml3245 operating.
Page 2
Table of contents fcc rf exposure compliance requirements - for occupational use only........……… 1 safety information.................................……………………………………………………….. 1 about topaz3...........................................…………………………………………………….. 2 about your legacy proline radios...............
Page 3
Fcc rf exposure compliance requirements - for occupational use only the federal communications commission (fcc), with its action in general docket 93-62, november 7, 1997, has adopted a safety standard for human exposure to radio frequency (rf) electromagnetic energy emitted by fcc regulated equipme...
Page 4
About topaz3 topaz3 is the exclusive supplier of maxon®, legacy and trutalk brand communication products. Our product line ranges from fcc licensed two-way radios suitable for business and industry (b&i) markets like farm, government, law enforcement, utility, etc. To consumer communications equipme...
Page 5
Mounting hardware mounting bracket operating instructions radio control buttons / operation features radio front a. Power / volume control - powers radio on and adjusts radio volume. B. Squelch control – adjust radio carrier squelch setting. C. Microphone jack – attaches standard microphone or optio...
Page 6
Backlit lcd features a. 8-character alphanumeric display - shows current channel setting, ctcss or dcs tone code setting, and other function indicators. B. Transmit (tx)) indicator c. Receive (rx) indicator d. Voice operated transmission (vox) indicator - shows vox operation is active, allowing hand...
Page 7
Radio functions tone signaling to help block out unwanted calls to your proline ml3215 / ml3245 can be programmed to look for privacy tones. Scan modes scanning is a dealer programmable feature that allows you to monitor a number of channels. Your radio communications dealer will help you define a s...
Page 8
Press the p-t-t bar after the tx inhibit time expires to resume transmitting. Two-tone decode each channel can be programmed with two-tone decode selections: individual call, group call and super group call. Your radio communications dealer can program your radio(s) for this feature. To activate or ...
Page 9
, , and . Scroll through the sub-menu settings with the up or down buttons. To enter a sub-menu, press the mode button when the desired sub-menu appears on screen. Settings include: you can toggle between these settings with the up or down buttons. When the desired setting appears on screen, press t...
Page 10
If you choose the idcs tone code setting, you will need to use the up or down buttons to select the desired tone code of 105 available. If you choose idcs code 023, your display will read: if you choose idcs code 754, your display will read: when the desired idcs tone code appears on the display, se...
Page 11
Display appears. Press and release the mode button again to select. Scroll through the sub-menu settings with the up or down buttons, press the mode button when appears on screen. Settings include: and . You can toggle between these settings with the up or down buttons. When the desired setting appe...
Page 12
System option settings menu to enter the system option setting menu, press and release the mode button during the receive or standby mode, then use the up or down buttons until appears. Select the above option with a press and release of the mode button. (beep set, vox (voice operated tx) set, time-...
Page 13
If you choose the busy channel lockout setting, your choices include: or . Toggle between the settings with the up or down buttons. When the desired setting appears on screen, press the mode button. Your radio will save your on or off selection and return to standby mode. Note: if you select “on”, a...
Page 14
If you choose the clear to talk setting, your choices include on or off settings. You can toggle between these settings with the up or down buttons. When the desired setting appears on the display, press the mode button to select. The radio will save your selection and return to standby mode. Exampl...
Page 15
Display option settings menu with the radio powered on, select the desired channel. Press the mode button and then the up or down buttons until appears. Press and release the mode button to select. Sub-menu settings include: time out timer tot off tot penalty penalty on penalty off 1 ~ 100 sec busy ...
Page 16
You can toggle between these settings with the up or down buttons. When the desired setting appears on screen, press the mode button to select. If you select , your choices will include: , and (name, channel number and frequency). You can toggle between these settings with the up or down buttons. Wh...
Page 17
B. Press the snd key to send the dialed number. C. When the called party answers, press the p-t-t of the microphone to answer. Release the p-t-t to listen for a response. D. When the conversation has ended press and hold the p-t-t of the microphone press and hold the # key for 1 or 2 seconds to end ...
Page 18
• clean external surfaces with a clean cloth dampened in a solution of dishwasher detergent diluted in water. Apply the solution sparingly to avoid any moisture leaking into cracks and crevices. Do not submerge the radio. Use a non- metallic brush, if necessary, to dislodge stubborn particles. Dry t...
Page 19
For any product which does not comply with the warranty specified, the sole remedy will be repair or replacement. In no event will topaz3 be liable to the buyer or its customers for any damages, including any special, incidental, indirect or consequential damages, or for the loss of profit, revenue ...