Leggero TRAK User Manual - page 15
TRAK
User Manual
Page 15
4.6 Folding and Unfolding Cont.
4.7 Footbed Height Adjustment
Optional Angle Adjustable Footbed:
1. Loosen bolts on inside of clamps with 4mm hex
wrench, 2 bolts per side. Reference Figure 13.
2. Adjust footbed to desired height.
3. Tighten bolts.
Standard Height Adjustable Footbed:
1. Loosen bolts/nuts on clamps with 4mm hex
wrench and 10mm wrench, 2 bolts/nuts per side.
Reference Figure 14.
2. Adjust footbed to desired height.
3. Tighten bolts/nuts.
Figure 13
Figure 14
WARNING!
When folding or unfolding, keep arms, hands, and
feet clear of moving components to avoid injury. Reference Figure
11, arrows indicate potential pinch points.
Pull Hip Angle Mechanisms
Push Tilt Lever with Foot
Push Back Forward
Trak in Folded Position
Unfolding
Figure 11