Leggero TRAK User Manual - Section 6: Maintenance

TRAK

User Manual

Page 23

Section 6: Maintenance

Please consult your authorized provider if you have questions regarding maintenance of your Trak 

chair.  Consistent and thorough maintenance will extend the useful life of your chair.  Improper 

maintenance can significantly decrease the useful life of the chair.  Any damaged parts should be 

replaced prior to resuming use of the chair.  The chair should be cleaned regularly and should be 

serviced by an authorized dealer at least once per year.

Warranty might be affected if proper maintenance is not performed at the specified intervals.  Please 

see table below for recommended maintenance procedures and frequency.  There is a maintenance 

record on the following page of this manual that should be used to document maintenance activities.

Maintenance Activity

Weekly

Monthly

Check tire air pressure (if applicable)

P

Check wheels and tires for wear or damage

P

Check wheel lock function and clean wheel lock rotors

P

Check for proper caster alignment

P

Verify that all fasteners are tight

P

Verify that quick release axles function properly

P

Check tilt lock mechanism for proper engagement

P

Check recline lock mechanism for proper engagement

P

Check all structural components for wear or damage

P

Check all accessory components for damage

P

We recommend that the chair be cleaned regularly:

•  Clean all frame components and plastic parts using mild detergents only.

•  Fabric parts may be washed.  If using a washing machine, put them in a linen 

bag or pillow case.  Air dry.

• 

In most cases, wiping with a damp cloth is sufficient.

•  Do not use your chair in salt water as severe damage may result.

•  Keep sand or other particles from damaging the wheel and caster fork 

bearings.