M-Audio DX4 User Manual - page 5
4. VOLUME CONTROL: This control determines the output volume level of the
DX4 speakers.
5. HEADPHONE OUTPUT JACK: This 1/8” jack outputs a stereo signal identical
to the DX4’s speaker output. When headphones are plugged into this jack, the
DX4 speakers are muted and headphone volume is controlled using the
volume control.
Rear
Note: This image shows the Rear panel of the Left Speaker. The Right
Speaker’s Rear panel contains only a single Speaker Terminal, for
connectioin to the Speaker Terminal of this Left Speaker).
1. RCA Line INPUTS (L & R) - There are two RCA Line Inputs, marked as follows:
< “L” - Left Channel Input (white jack) &
< “R” - Right Channel Input (red jack).
These jacks accept standard RCA input connections with unbalanced wiring.
The included 1/8-inch mini jack-to-RCA audio cable allows users to connect the
DX4s to other equipment accepting 1/8-inch mini jack connections.
2. TRS INPUTS (L & R) - There are two RCA Line Inputs, marked as follows:
< “L” - Left Channel Input) &
< “R” - Right Channel Input).
These jacks accept a 1/4” connection with either balanced or unbalanced wiring.
Unbalanced 1/4” wiring can be done with either a two- or three-conductor (TS
or TRS) plug. A two-conductor (TS) plug automatically grounds the signal’s
4