M-Life OkyFly2 Reference Manual - Connecting to A Tv Set

Installation

10

First Audio/Video connections

To start using your OkyFly2, just connect the microphone and the TV

(and the amplification system, if used).

Connecting 1 or 2 Microphones

Connect the OkyMic microphone

supplied to one of the inputs on the

front part of OkyFly2, using the cable

supplied.

The two microphone inputs are identical and

can be used to connect 1 or 2 microphones.

It’s therefore possible to amplify for example

one or two voices, a voice and chorus, a voice

and an acoustic instrument, etc.

You can use any dynamic microphone.

Obviously, the better the microphone, the

better the results...

Connecting to a TV set

Use the AV (Audio Video) cable supplied to connect OkyFly2 to the SCART (or AV)

connector of your television set.

You can use numerous connection

options, according to the type of

equipment available and the sound

quality and power required.

In the “Connection Examples” chapter, you

can find various solutions, from which you

can choose whichever is most suited to your

needs.

N.B.: the example illustrated alongside only shows the easiest

connection, not necessarily the best: In fact, in the majority of

cases, the power and quality of a television set’s amplification is

rather poor, or at least not particularly suited to this use.

Switch on the TV and set it at AV.

Set the volume of your sound system, whatever type it is (TV, Hi-Fi, audio

mixer, etc.), at a moderate level, at least initially: this will avoid sudden signal

peaks, and you can always adjust the volume later.