M-LOCKS T8530 User Instructions - page 4
USER INSTRUCTIONS
T8530
M-LOCKS BV
Tel: +31 (0)314 376 876
Vlijtstraat 40
ver. 1.0 2010 12 29
Fax: +31 (0)314 376 878
NL-7005 BN Doetinchem
4
www.m-locks.com
Special Events: “Verify & Delete”
When this function is selected, the display will show all entered special events, in order of time:
•
To run the Menu, press button until the display shows the message ´End of List´.
•
To delete a period, press button . The LCD display shows the following message:
•
Press button to confirm and delete the special event.
Change Code
Use this menu to change the Master Code.
The LCD display shows the following message:
Enter the new 8-digit Master Code.
The LCD display will show the following message:
Confirm the new code.
If the new code is not accepted, the entry unit will emit a long sound signal (beep) and the entire
procedure has to be repeated.
IMMEDIATE AND TEMPORARY TIME LOCK
This function allows users to start up an immediate and temporary time lock.
To get access to this function press the button and then button .
Once entered this function, if no operation is done within 30 seconds, the system will automatically
switch off.
Access to this function is not allowed during the Time Delay period.
•
If a Time Lock period has already been programmed, the LCD display will show the following
message:
DD / MM hh : mm
DD / MM hh : mm
Delete?
Enter
New code
Confirm
New code
Immediate T.L.
MON 23/06 08 : 00