M&V S.r.l. Vesuvius Owner's Manual - Esuvius Owners Manual
M&V S.r.l.
Via L. Guerra, 9
80040 Cercola (NA)
Ph./Fax +39 0815552428
e-mail:
info@mevsrl.net
© M&V S.r.l.
vesuvius userguide7 Aug 25 2014.doc
Page 13 of 20
Information Technology Solutions
V
ESUVIUS OWNERS MANUAL
DRAFT
COPY
The profile screen
The Vesuvius has 5 pressure profiles each with
up to 7 phases. Touching the "home screen"
anywhere when the machine is not in stand by,
brings up the profile screen below.
This screen shows the 5 profiles available and a
home icon. To program or view a profile, simply
touch one of the 5 profile icons for 5 seconds.
Touching the home icon returns you to the "main
menu" screen below.
Touching the "X" icon returns you to the "home
screen".
Programming or examining pressure
profiles
The profiling system is very easy to use and can
achieve results as simple or complex as you care to
program. After you touch and hold a profile icon (P1)
for 5 seconds, you will enter this screen.
This screen tells us that for the 1st phase (of the 7
phases available), the Vesuvius will deliver a
pressure of 2.0 bar for 10s. Pump acceleration
discussed later affects how quickly the pump
responds and will affect the speed at which any
preset pressure is reached.
•
Touching the - or + icon will increase or
decrease the time and touching the "tick"
icon will store the value in memory.
•
After this the - or + icon will increase or
decrease pressure settings. touching the
"tick" icon saves the settings and displays
the next phase. The procedure is repeated
to program the next phase.
•
If no changes are desired, simply press the
"tick" icon twice to move to the next phase.