M&V S.r.l. Vesuvius Owner's Manual - Esuvius Owners Manual
M&V S.r.l.
Via L. Guerra, 9
80040 Cercola (NA)
Ph./Fax +39 0815552428
e-mail:
info@mevsrl.net
© M&V S.r.l.
vesuvius userguide7 Aug 25 2014.doc
Page 9 of 20
Information Technology Solutions
V
ESUVIUS OWNERS MANUAL
DRAFT
COPY
Understanding the display & programming
functions
The Vesuvius has a dot matrix display with much
more information than a standard espresso machine
and presented in a slightly different form.
The display is capacitive sensing and only has to
be touched to elicit a response, no pressure is
necessary. The display may appear not to respond,
because some functions have a programmed delay.
In these cases the area should simply be touched
for the appropriate time e.g. entering the advanced
menu has a 10s delay, to reprogram a profile has a
5s delay.
The display above is typical of the display when the
machine is on standby. Touching the area marked
with a red circle, switches the machine on and the
"home screen" is shown (below).
The display now is split into 3 Horizontal zones.
The top zone shows brew pressure (when brew
lever activated), Steam boiler temperature and
pressure.
The next Zone shows what pressure profile is being
used and this is a sideways scrolling display.
The third zone has a tank water level indicator,
which actually only shows full and empty. The
time and day of the week and on the right the brew
boiler temperature next to a thermometer graphic.
Main Vesuvius Screens
Note: Profile settings, as well as all other menu
settings are maintained even if the machine is
unplugged via a battery powered backup system.
Brew
Pressur
Service
(steam)
boiler
temperature
Service
(steam)
boiler
pressure
Home
Home screen, this
is the usual screen
you will see.
Main menu for
accessing most
commonly used
settings
Profile menu for
viewing and
changing profiles
1st screen of the
advanced menu.
Home Screen