Macally WIFISD2 Quick Start Manual - page 7
5
3.3 For Mac OSX or Windows Users
The client software will connect the computer to the WIFISD2 wirelessly to
share files and stream multimedia content. Please download “Stor-N-Go for
Mac” or “Stor-N-Go for Windows” from http://us.macally.com/pages/drivers-
and-downloads. Install on your computer and run the file.
3.2 For Android Users
Please go to Google Play Store and search for
“Stor-N-Go” or “Macally”, select and install the
Stor-N-Go app onto your Android devices.
4.1 For iOS Users
Open Settings > and choose Wi-Fi option in your
device. Choose “WIFISD2-XXXX” from the available
network list and input the default password
“12345678”. Once the connection is established,
you will see “Connected” next to the network.
To use it as the Media Hub and Travel Router, do not connect the WIFISD2 to a
computer. Enable Wi-Fi mode by pressing the power button for 2 seconds and
wait for the Wi-Fi to boot up. The Wi-Fi LED should be a solid blue indicating that
Wi-Fi access is ready.
Step 4. Using the Media Hub and Travel Router
*Note: Android 3.0 and above is required.