Macam AM-M81 User Manual - page 21
AMACAM AM-M81
USER MANUAL
Page 19
Image has horizontal stripes interference
This due to the wrong setting of “Flicker” .Please check the local power supply
frequency and reset the Flicker setting in Main menu to 50 Hz or 60 Hz.
Camera does not start recording automatically after the car power is turned on
Please make sure the loop recording in Main menu is set to 1, 3 or 5 mins, and is
not OFF, The camera will not auto start recording when loop recording is OFF;
Auto record will only function when there is a SD/TF card inserted in the camera..
The camera keeps automatic recording and will not stop stop .
Check if the Motion Detect in Main menu is switched on. .You can check whether
the icon
is dis[played on the screen. When the Motion Detect is ON, the camera
will start recording when a moving object appears within the range of camera.
When the screen is stationary, the recording will stop automatically until a moving
object appears again.
Auto power off setting does not work
Check that motion detection is turned off. If the motion detection is turned on, the
camera will always be in standby mode and will start recording when movement is
detected, the machine will not automatically shut down until the power is switched
off
What can I do if the camera software crashes and locks up?
If the camera locks up, press the power button (10) for 10 seconds, the machine will
reset and restart.
12.
Technical Support
For further technical Support please e-mail to
support@amacam.net
stating :
Name and e-mail address
Camera model
Nature of your problem.
Or contact us through the website at
www.amacam.net