Macam AM-M81 User Manual - page 9
AMACAM AM-M81
USER MANUAL
Page 7
6.3.2. Hand held Manual operation
Video recording (Video camera depicted in top left)
Switch power on by pressing Power button (10) once.
Camera will turn on in Video mode
If Motion detect is set to ON, the recording will start immediately.
If motion detect is set to OFF, Press OK (5) and release to start recording.
Red indicator light on screen will start to flash
Press OK (5) again to stop recording.
Take still photos.
To take still pictures whilst in Standby mode press and hold the OK button
(5) until the photo has been taken. The camera icon will appear in top left
corner of screen whilst still photo is being taken.
Still photos can be taken during video recording by pressing and holding
the OK button (5) during the recording. Recording will continue after
photo has been taken.
6.4.
Play back
Play back or review of the video files and photos may be carried out either on the
camera or by connecting the camera to a computer.
6.4.1. To review on the computer
See Section 12.4 (Connecting to the computer) below.
6.4.2. To review files on the camera
Turn the camera on by pressing the Power button (11)
Press and hold the DOWN (6) button until the screen changes a selection
of MOVIE files appears.
Press and hold DOWN button again to access the selection of PHOTO
files of still pictures taken.
Press and Hold Down button to return to Video or Standby mode