Macintosh C36 Owner's Manual - page 12
RECORD FUNCTIONS
4. TAPE OUTPUTS 1, 2 and 3
These outputs provide signals to feed as many as three separate tape recorders. The program
that appears at the tape outputs is determined by the setting of the front panel RECORD switch.
Connect a cable from the C36 left channel TAPE 1 OUTPUT to the left channel high level
input of a tape recorder. Connect a cable from the C36 right channel TAPE 1 OUTPUT to
the right channel high level input of a tape recorder. Connect a second and third tape recorder
in a similar manner.
5. PROCESSOR-FROM AND TO
An external signal processor can be added to the C36 which will affect only the TAPE
RECORD OUTPUT jacks.
The PROCESSOR-FROM jacks have built-in switching contacts to allow normal signals to
pass through when no cables are connected. When an external processor is properly con-
nected, the program signals feed to the processor from the C36 PROCESSOR-TO jacks, and
return to the C36 at the PROCESSOR-FROM jacks.
Connect a cable from the left channel processor output to the C36 left channel
PROCESSOR-FROM jack. Connect a cable from the right channel processor output to the
right channel PROCESSOR-FROM jack.
Connect a cable from the C36 left channel PROCESSOR-TO jack to the left channel pro-
cessor input. Connect a cable from the C36 right channel PROCESSOR-TO jack to the pro-
cessor right channel input.
WHEN AN EXTERNAL SIGNAL PROCESSSOR IS CONNECTED TO THE C36, THE PRO-
CESSOR MUST BE TURNED ON AND OPERATING FOR A PROGRAM TO BE FED TO
THE TAPE OUTPUTS.
AUDIO INPUTS
6. VIDEO
Use these inputs for the audio signals from accessories such as a Laser Disc Player, VCR,
or TV receiver.
Connect a cable from the left channel audio output of the video unit to the C36 L (Left)
channel VIDEO INPUT. Connect a cable from the right channel output to the C36 R (Right)
VIDEO INPUT.
7. TAPE 1, 2 and 3
Connect a cable from the left channel output of a tape recorder to the C36 L (Left) channel
TAPE 1, 2 or 3 INPUT. Connect a cable from the right channel output to the C36 R (Right)
TAPE 1, 2 or 3 INPUT
A total of three tape recorders can be connected to the C36. The Tape inputs can also
be used for other accessory equipment with similar output levels.
IF MORE THAN ONE TAPE RECORDER IS CONNECTED TO BOTH RECORD AND PLAY,
MAKE CERTAIN THAT THE INPUTS AND OUTPUTS ARE CONNECTED TO THE SAME
MATCHING NUMBERED JACKS.
8. TUNER
Connect a cable from the left channel output of a tuner to the C36 L (Left) TUNER INPUT.
Connect a cable from the right channel output to the C36 R (Right) TUNER INPUT.
9. CD1 and 2
Connect a cable from the left channel output of a CD player to the C36 L(Left)CD1 INPUT
Connect a cable from the right channel output to the C36 R (Right) CD1 INPUT. Connect a
second CD player to the C36 CD2 inputs in a similar manner.
HOW TO
MAKE
CONNECTIONS
ON THE
REAR PANEL
10