MadMan AP-WRC2 Installation & User Manual - Ap-Wrc2
AP-WRC2
Installation & User Manual
Rev 0.2
1.4
Important Information
1.4.1 SAFETY WARNING – PLEASE READ CAREFULLY
The AP-WRC2 remote control is an electronic device which, as with
all electronic devices, could unexpectedly malfunction or not work as
intended.
If any problems arise during use, turn the AP-WRC2 off at its on/off
switch and determine whether the problem persists with the AP-WRC2
turned off. Do not use the remote control while underway if any problems
are evident or if you suspect the remote control is causing problems.
Perform all testing of the remote control while the vessel is
stationary to avoid unplanned or uncontrolled course changes.
The batteries of the fob could become too discharged to operate
properly at any time. Also, with crew moving about the boat and items
being stowed in different locations the operating range of the remote can
be affected differently from one moment to the next.
Therefore, do not use the AP-WRC2 in situations where there is
insufficient room for the vessel to alter course without risk of collision
or grounding, such as in a narrow channel or when in close proximity to
other vessels.
1.4.2 Disclaimer
Use the AP-WRC2 entirely at your own risk. Madman Marine Pty Ltd
will not be held liable for any consequential loss, damage or injury in any
way connected with the use of the AP-WRC2 remote control. Madman
Marine Pty Ltd’s liability under any circumstances shall not be greater
than the purchase price of the AP-WRC2 remote control.
5