Magellan RoadMate Series User Manual - page 8
4
Settings Menu
Accessing the Settings Menu
1. From the Map screen, tap Menu.
2. Tap the Settings icon at the bottom of the screen.
The Settings Menu allows you to customize the Magellan RoadMate application for your particular needs.
Map
Set Night Mode use, 2D, 3D or 3D+ display, auto zoom, highway lane assist
markers or viewing POI icons on the map. (3D+ uses the 3D view of the map
as well as displays 3D buildings.)
Sound
Turn application sounds and speeding warnings on or off, amplify the volume
or turn speed sensitive volume on or off. You can also change the navigation
sound volume using the slider bar at the bottom of the display.
Units
Set the units of measure to miles/feet, miles/yards or kilometers/meters.
Navigation
Choose your default routing method (fastest time, shortest distance, most or
least use of freeways), set turn warnings on or off, avoid u-turns and avoid toll
roads to be used when calculating your route.
Routing
Mode
Choose Car or Pedestrian. iPod touch cannot utilize the pedestrian mode as
the iPod touch does not have a built-in GPS receiver.
Current
Location
Displays information about your current location. (Same screen that can be
accessed from the OneTouch > Emergency icon.)
Voice
Language
Choose the male or female voice as well as the language used that will be
used for voice guidance.
Program
Language
Select the language used to by the application.
Time
Format
Select 12 hour or 24 hour time display.
Starting
Position
Allows you to manually set your current position. Note, this turns the GPS
portion of the application off and is useful for searching cities you are not
currently in for points of interest and other information.
Product
Information
Detailed information on the application version, serial number, area covered
and the maps used. Also provides access to the End User License Agreement
(EULA).