1. DL manuals
  2. Magellan
  3. Wireless Access Point
  4. RTX3
  5. Reference And Installation Manual

Magellan RTX3 Reference And Installation Manual

Manual is about: Wireless Expansion Module

Summary of RTX3

  • Page 1

    Rtx3: wireless expansion module v5.1 reference and installation manual.

  • Page 3: Table of Contents

    Table of contents specifications.............................................................. 4 hardware compatibility............................................... 4 overview............................................................. 5 description...................................................

  • Page 4: Specifications

    Page 4 specifications hardware compatibility power input voltage: 12vdc frequency: 433mhz or 868mhz sensitivity: -120 dbm current consumption: 50 ma dimensions (no antenna): 15cm x 16cm x 3cm (6in x 6.5in x 1.1in) operating temperature: 0°c to 49°c (32°f to 120°f) pgm outputs: pgm1 and pgm2 - 150ma ...

  • Page 5: Chapter 1: Overview

    Overview page 5 chapter 1: overview description the rtx3 is a 2-way, 32 zone wireless expansion module which enables imperial, dgp/evo, spectra sp series or esprit control panels to support wireless hardware such as motion detectors and remote controls. Features • up to 32 wireless zones • support f...

  • Page 6

    Page 6 overview 1. Led display (see led feedback on page 8) 2. Firmware upgrade serial connection (see firmware upgrade on page 18) 3. Anti-tamper switch 4. Pcb screw 5. Antennas 6. Mounting clips 7. Esprit mode programming button: press to enter programming mode in esprit mode (see programming for ...

  • Page 7: Chapter 2: Installation

    Installation page 7 chapter 2: installation 1. Control panel combus connection note: if you are using the rtx3 as a stand-alone device, connect an external 12vdc power supply to the red and blk terminals. Battery backup is recommended. 2. If the current draw exceeds 150ma on pgm1 or pgm2, use a rela...

  • Page 8: Led Feedback

    Page 8 programming led feedback chapter 3: programming this chapter provides programming instructions for imperial, spectra sp series, evo, esprit, and stand alone installations. Programming for imperial when connected to an imperial panel, all rtx3 settings are programmed using babyware. For more d...

  • Page 9: Programming For Evo

    Programming page 9 to program an rtx3 for an imperial system: 1. When babyware is communicating with the v32 controller and an rtx3 module is connected to the multibus, it automatically appears in the modules display area. To view the modules display area, click the modules toggle button. Alternativ...

  • Page 10

    Page 10 programming rtx3 programming sections for evo section feature details [001] rtx3 options option [1] low battery supervision for rtx3 version 1.5 and higher, this option is always on (default: on). Option [2] check-in supervision default: off option [3] check-in supervision time interval off ...

  • Page 11

    Programming page 11 [101] to [132] assign wireless transmitters [101] = zone input 1 [132] = zone input 32 enter 6-digit serial number or press and release the transmitter’s tamper switch. To delete an assigned transmitter, enter 000000 as a serial number. See text remote controls to program remotes...

  • Page 12: Rtx3 Pgm Options For Evo

    Page 12 programming rtx3 pgm options for evo [901] to [908] assign 2wpgms [901] = pgm 1 [908] = pgm 8 enter 6-digit serial number or press and release the transmitter’s tamper switch. To delete an assigned 2wpgm, enter 000000 as a serial number. If a section between [901] to [904] is empty, the rtx3...

  • Page 13

    Programming page 13 * in order to use the “flexible pgm deactivation” option (option [8]), the “pgm deactivation after option” (option [1]) must be on. Pgm deactivation pgm number event group feature group start # end pgm1 [914] [915] [916] [917] pgm2 [924] [925] [926] [927] pgm3 [934] [935] [936] [...

  • Page 14

    Page 14 programming rtx3 remote programming for evo - without a k641/k641r keypad section feature details [040] to [043] view or delete used remotes [040] = remotes 1 to 8 [043] = remotes 25 to 32 after entering the section, select which of the eight remote positions you wish to delete. Any remote p...

  • Page 15: Esprit Programming

    Programming page 15 programming for esprit and stand alone to enter programming mode with esprit or in stand alone mode: 1. Connect an esprit 636 or 646 to the “program” connector. 2. Press the “esprit mode programming” button. 3. Press [ enter ] on your esprit keypad and enter the installer code (d...

  • Page 16

    Page 16 programming section feature details [401] to [432] remote control button options option [4] to select pgm, see section [011] enable button for pgm activation (default = on) option [5] to select pgm, see section [012] enable button for pgm activation (default = on) option [6] to select pgm, s...

  • Page 17

    Programming page 17 section feature details [011] to [014] pgm output activation [011] = remote button [012] = remote button [013] = remote button [014] = remote button refer to section [401] to [432] option [1] activate pgm 1 output default on in section [011] option [2] activate pgm 2 output defau...

  • Page 18: Stand Alone Use

    Page 18 programming stand alone use the rtx3 can be used as a stand alone module. The programming sections are the same as when used with an esprit with the following exceptions: • in stand alone mode, section [001], option [1] and option [2] will not affect system use. • panic alarms can only be us...

  • Page 19: Index

    Page 19 index sections 2wpgm assigning ...................................................................................................12 signal strength ...........................................................................................11 a antennas .........................................

  • Page 20

    Page 20 k k641 ................................................................................................................9 l led display .......................................................................................................6 led feedback ..........................................

  • Page 21

    Page 21 s sensitivity .........................................................................................................4 signal strength ................................................................................................11 specifications ............................................

  • Page 22

    Page 22 patents: one or more of the following us patents may apply: 7046142, 6215399, 6111256, 6104319, 5920259, 5886632, 5721542, 5287111, 5119069, 5077549 and re39406 and other pending patents may apply. Canadian and international patents may also apply. Trademarks: imperial, evo, spectra sp serie...

  • Page 24

    Rtx3-ei10 05/2010 paradox.Com printed in canada for technical support in canada or the u.S., call 1-800-791-1919, monday to friday from 8:00 a.M. To 8:00 p.M. Est. For technical support outside canada and the u.S., call 00-1-450-491-7444, monday to friday from 8:00 a.M. To 8:00 p.M. Est. Please feel...