MagicalButter.com MB2e Owner's Manual - page 7
Situation
Cause
Solutions
Machine will
not start, makes
continuous
beeping sound
Not enough liquid
inside pitcher
Dirty overflow sensor*
Temperature not
selected before
Cycle Time
Blender motor starts
once extraction
temperature is reached
Pitcher filled under
MIN line or
above MAX line
Level of liquid is
above MAX line
Too much soap
added during
Clean cycle
Contact us at:
MagicalButter.com
First select Temperature;
then select Cycle Time
Wait about 15 minutes
into cooking cycle for
blending to begin
Use correct amount
of ingredients per
owner’s manual
Be sure level of contents
is below MAX line
Reduce amount of
soap used during
Clean cycle
Contact us at:
MagicalButter.com
Clean overflow sensor*
Be sure level of contents
is between MIN and
MAX lines
Blender motor
not functioning
Spillover
Other issues
*See Page 5, #10
Troubleshooting Guide
10
Balancing Nature & Technology.
TM
Tips & Frequently Asked Questions
11
What is the purpose of the LED lights, and what do they tell me?
Aside from providing ambiance and a colorful, entertaining light show in your kitchen,
the integrated LED display encircling the top of your MagicalButter appliance has
an important functional purpose: immediately informing the user of the machine’s
operating status. The lights are strategically positioned to reflect off the ceiling in
a dark room during operation. As the device is exceptionally quiet when not blending
or stirring, the LED display constantly and silently indicates that the cooking cycle is
proceeding. The lights automatically shut off, and the unit beeps, to notify you when
the cycle is completed.
What does each button do?
Each button runs a preset, microprocessor-controlled cycle––grinding, heating,
extracting, and stirring. To intensify your results, simply extend your extraction time by
selecting a longer cycle. The default cycle time for Oil is 1 hour, for Butter 2 hours, and
for Tincture 4 or 8 hours. The Clean function has a maximum run time of 3 minutes.
How do I use the self-cleaning function?
Unplug the electrical cord from the device. Fill the pitcher with water to a level halfway
between the MIN and MAX lines. Add a small amount of dish soap, secure the head,
plug the electrical cord back in, and press the Clean button.
After the Clean cycle has completed, unplug the electrical cord from the device, and
rinse the remaining soap out of the interior of the machine. Note: DO NOT WET OR
SUBMERGE ANY BLACK-COLORED PARTS OF THE MACHINE.
For more tips and up-to-date information, please visit www.MagicalButter.com.
If you have a question about your MB machine, please call our
toll-free customer service number, (800) 420-4334. Please have
the model, type, and series of your MB machine handy for your
representative of TeamMB to help you more efficiently.
Customer Service