Magicbook SHB-V7S6 User Manual - page 50

Power 

Battery Low Signals and Actions 

Battery Low occurs when the battery has approximately 10 % (Windows 

default setting) of its charge remaining. The computer gives warning 

beeps or messages and the Battery Charge Indicator ( 

 ) blinks red to 

alert you to take actions. 

NOTE: You can set up your threshold and signals of Battery Low under Windows. 

Immediately save your data upon Battery Low. The remaining operating 

time depends on how you are using the computer. If you are using the 

audio subsystem, PC card, hard or floppy disk drives, the battery might 

run out of charge very quickly. 

Always respond to Battery Low by placing your computer on Standby or 

Hibernation mode, turning off the computer, or connecting the AC 

adapter. 

If you do not take any action, the computer will automatically hibernate 

and turn off. 

CAUTION: 

If you are using a flash PC card, do not access the card during battery low periods. 

This is because the access may take longer than the time it takes the battery to run 

out of charge, thus making your access to the card unsuccessful. 

If you fail to save your data when the battery completely runs out of charge, then 

you lose your data. 

3-6 Managing