Magicbook SHB-V7S6 User Manual - You Cannot Eject A Disc.

Troubleshooting 8-5 

You cannot eject a disc. 

The disc is not properly seated in the drive. Manually release the disc 

following the method described next: 

1.  Turn off the system. 

2.  Insert a small rod, such as a straightened paperclip, into the 

drive’s manual eject hole and push firmly to release the tray. 

3.  Pull the tray out until fully extended, and then remove the disc. 

Display Problems 

Nothing appears on the screen. 

During operation, the screen may automatically turn off as a result of 

power management. Press any key to see if the screen comes back. 

The brightness level might be too low. Increase brightness by 

pressing 

Fn+F7

. 

The display output might be set to an external device. To switch the 

display back to the LCD, press 

Fn

+

F5

, or change the display through 

the settings in Display Properties. 

The characters on the screen are dim. 

Adjust the brightness and/or contrast.