Magnasonic FS50 User Manual

Other manuals for FS50: User Manual, User Manual

Summary of FS50

  • Page 1

    User manual film scanner fs50 magnasonic.Com/support thank you for your purchase of this magnasonic product. Please read this instruction manual carefully before using product to ensure proper use. Keep this manual in a safe place for future reference..

  • Page 2

    Important safety information retain this manual for future reference 1. Read these instructions. 2. Keep these instructions. 3. Read all warnings. 4. Follow all instructions. 5. Do not use this product near water. 6. Clean only with a dry cloth. 7. Clean the screen only with a dry cloth, moistened s...

  • Page 3

    4 5 foreword thank you for purchasing this product. Read this manual carefully before use, and save the instructions for future reference. Please use this product properly. We reserve the right to change models, configuration, or specifications without notice or liability. Product may not be exactly...

  • Page 4

    6 7 guide menu capture picture 1. Before scanning please make sure the inner backlight panel is clean. Note: you can use the provided brush to clean the screen. Install the negative method 1. Hold up the slide toward the light. 2. Face the right side of the slide to yourself. 3. Take the slide holde...

  • Page 5

    8 9 2. In the main menu mode press ok/enter to enter capture mode. Then press mode then press ok/enter to capture the picture. Before pressing ok/enter to capture picture, press the left button to mirror and press right button to flip the current picture. Press ok/ enter button to set exposure. Pres...

  • Page 6

    10 11 how to playback captured picture in the main menu, press , until you see . Press ok/enter the picture auto-playback mode press again to stop auto playback or you can view captured pictures manually by pressing , then pressing ok/enter again to enter picture editing mode. You can rotate, delete...

  • Page 7

    12 13 formatting in the main menu, press until you see ,press ok/enter button to enter. Note: after using this function, all information in the micro sd card will be deleted. Connect to computer under the main menu mode press until your see . Then press ok/enter. After successful connecting to compu...

  • Page 8

    Notes notes.

  • Page 9: Magnasonic.Com

    Magnasonic.Com.