Magnasonic FS50 User Manual - page 6
6
Install The negative method
1.
Hold up the slide toward
the light.
2.
Face the right side of the
slide to yourself.
3.
Take the slide holder out.
4.
Let the side with “OPEN”
logo face yourself, and let the
side with “ ”logo face down.
5.
Open the slide holder, then
place slides into the holder
(fi lm can also be loaded as a
strip into the slide holder).
6.
Close the slide holder and
press the edges so that it
locks in place.
7.
Insert the slide holder into
the slot on the right side of
the fi lm scanner as shown.
Handle fi lms with care to avoid scratches or fi nger prints(for the best results
use cotton gloves when handling fi lms) It is recommended to use compressed cotton
to remove any dust on the fi lms.
11
Setting Language
Under the Main Menu mode press
until you see
. Then press
OK/ENTER tochose a language. Then press
and OK/ENTER
to choose one of following 8 languages: English, French, Spanish,
Simplifi ed Chinese, Traditional Chinese, Japanese, German or Italian.
Changing Resolution
Under the Main Menu mode, press
until you see
. Then press
OK/ENTER to enter into Resolution Mode. You can choose 14M or
22M (interpolation).