Magnat Audio VC 2 User Manual - page 12
THE FUNCTIONS OF THE VC 2
SOUND SETTINGS
Setting the volume
The volume can be adjusted by using the VOLUME regulator on the front panel (10) or on
the remote control (24). VOL and a value between 00 and MAX (40) then appears in the
display.
MUTE (remote control, pos. 25)
The sound can be deactivated using this button. MUTING flashes on the display.
The sound can be reactivated by pressing this button again or by altering the volume.
Adjusting the bass/treble
Repeatedly press TONE on the remote control (23) until
BASS or TREB appears in the
display. Adjust the tone by using the TUNING buttons on the remote control (16, 17).
Adjusting the balance
The balance setting is selected in the same way as the tone regulator. Press the corre-
sponding button repeatedly until
BAL L00 - 00R appears in the display. The balance can
be adjusted to the left or right by using TUNING (16).
EQ Function
Various equaliser settings can be called up by pressing the EQ button on the remote con-
trol (22). The following settings can be selected: LINEAR, MOVIE, MUSIC, VOCAL. These
can be selected by repeatedly pressing the EQ button.
DVS Function
With
DVS SET (remote control, pos. 26) you can switch off the virtual 5-channel sound via
stereo speakers (Dolby® Virtual Speaker) or select between
“DVS Ref” and “DVS Wide”.
DVS Ref is the standard mode with which you can create the 5-channel sound with the
two front speakers.
DVS Wide generates an expanded (broader) sound field for the front channels.
28
OSD MENU
The VC 2 is equipped with an OSD (On Screen Display) menu. All necessary basic settings
can be made using this menu if
“DISC” was selected as input source.
You open the menu with the setup button on the remote control (pos. 11).
Use the cursor buttons (pos. 14) to select a menu item. This will then appear in a frame
or on a light background. You can select the menu element with the OK button or navigate
through additional submenus with the cursor keys. You can change a setting with the OK
button.
Press the SETUPkey to quit the OSD menu.
MAIN PAGE OF THE OSD MENU
Language
Video
Audio
Rating
Default
From this page you can access the various submenus:
Under
Language you can select the language for various menus of the VC 2.
Under
Video you can reach the Video Setup, where you can make various picture
settings.
Under
Audio you can reach the AUDIO SETUP, where you can make various sound
settings.
Under
Rating you can set authorizations for the playback of films.
Under
Default you can reset the VC 2 to the factory settings.