Magnat Audio VC 2 User Manual - page 6
OPERATIONAL ELEMENTS AND CONNECTIONS - BACK SIDE/CONNECTIONS
12 13
14
15 16 17
18
11
10
9
8
7
6
5
4
1
2
3
1 POWER AC 230V
5 SPEAKER OUT R/L
11 Digital OUTPUT
17 INPUT AUX 3
Mains supply. For connecting the supplied
Output for the connection of the supplied
Optical and coaxial digital audio output.
Analog audio input.
mains cable.
satellite speakers (the correct polarity
must be taken into account).
12 ANT FM
18 SCART OUT
2 FUSE
Antenna connection. For connecting the
SCART output.
Only use a fuse with the parameters
6 OUTPUT R / L
supplied FM indoor antenna or a house
indicated on the rear of the device.
Analog right and left audio output.
antenna.
3 On / Off
7 OUTPUT S-VIDEO
13 ANT AM
Mains switch. Switches the device on and
S-video (Y/C) output.
Antenna connection. For connecting the
sets it in the standby mode. If the switch
supplied AM loop antenna.
is set to the
“OFF” position, the device is
8 OUTPUT COMPOSITE
disconnected from the mains supply.
Video composit (FBAS) output.
14 Digital INPUT
Optical and coaxial digital audio input.
4 SPEAKER OUT SUB
9 OUTPUT COMPONENT
Output for connecting the supplied
Analog video component output (YUV)
15 INPUT AUX1
subwoofer.
Analog audio input.
10 HDMI OUTPUT
HDMI output. (High Definition Multimedia
16 INPUT AUX2
Interface).
Analog audio input.
22