Magnavox 32MV304X Owner's Manual - page 10
Changing Picture and Sound Settings
You must set
Home
in
Location
.
L
p. 13
Otherwise, personalized Picture and Sound settings will not
be memorized after the Unit goes into Standby Mode.
Changing Picture Settings
1
Display
Setup
using Home Menu and use
H
I
to select
Picture
, then press
OK
.
Color alignment
Personal
Advanced settings
Sharpness
Tint
Color
Brightness
Contrast
Backlight
Auto picture
Software
Installation
Features
Sound
Picture
USB
2
Use
H
I
J
K
to select the item you want to adjust,
then press
OK
.
Auto picture
to select the desired Setting, then press
OK
(
Personal
,
Standard
,
Vivid
,
Sports
,
Movie
,
Game
,
Energy saving
and
Internet video
)
J
Cursor
Cursor
K
Backlight
to Reduce Power
Consumption and
Brightness
to Increase Power
Consumption and
Brightness
Contrast
to Decrease Contrast
to Increase Contrast
Brightness
to Decrease
Brightness
to Increase Brightness
Color
to Decrease Color
Intensity
to Increase Color
Intensity
Tint
to Add Red
to Add Green
Sharpness
to Soften
to Sharpen
Advanced settings
to select the desired Setting, then press
OK
(
Color alignment
,
Noise reduction
,
Light
sensor
*
,
Black stretch
,
Dynamic contrast
,
Gamma
,
BMR 120
,
MPEG artifact reduction
,
Color enhancement
,
Custom color
management
and
Film mode
)
Picture format
Automatic
Changing Picture
Format
L
p. 11
Super zoom
4:3
Movie expand 14:9
Movie expand 16:9
Wide screen
Unscaled
Mode selection
PC
to Turn Off image
enhancement features
which makes the TV
to act purely as a
monitor
HDTV
to enable image
enhancement features
to improve picture
quality
Auto adjustment
to automatically adjust the horizontal / vertical
position, clock and phase on the PC screen
J
Cursor
Cursor
K
Clock
to Decrease setting
value
to Increase setting
value
Phase
Horizontal
position
to move PC screen left
to move PC screen
right
Vertical position
to move PC screen
down
to move PC screen up
O
Note(s)
●
Adjusts Backlight for the Best Picture Quality by Dynamically
Adjusting the Backlight Intensity in accordance with the Room
Lighting Condition when the
Light sensor
*
feature is Set to
On
.
Please ensure the Room Lighting is Stable and the Light Sensor
is Not Blocked.
*
55MV314X / 50MV314X / 40MV324X only.
Changing Sound Settings
1
Display
Setup
using Home Menu and use
H
I
to select
Sound
, then press
OK
.
Software
Installation
Features
Sound
Picture
PCM
On
Off
Start now
Personal
Digital output format
Headphone volume
TV speakers
Auto volume leveling
Balance
Equalizer
Auto sound
Off
DTS TruSurround
USB
2
Use
H
I
J
K
to select the item you want to adjust,
then press
OK
.
●
The following sound settings can be configured. Depending on
the sound source, some sound settings are not available.
Auto sound
to select the desired Setting, then press
OK
.
(
Personal
,
Standard
,
Vivid
,
Sports
,
Movie
,
Music
and
News
)
Equalizer
to select the specific frequency using
H
I
, and
use
J
K
to Adjust the Level, then press
OK
.
Balance
Adjusts the balance of the right and left
speakers to Best suit your listening
preferences.
Digital audio
language
Available for Digital channels only when
multiple languages are broadcast. Lists
available audio languages.
Alternate audio
Main
Available for Analog channels
only when a Main and Second
Audio Program (SAP) is
broadcast. Select the Main
Audio Program.
SAP
Available for Analog channels
only when a Main and Second
Audio Program (SAP) is
broadcast. Select the Second
Audio Program.
Mono/Stereo
Mono
to Output Mono-audio.
Stereo
to Output Stereo-audio.
10
Continued on next page.