Magnavox MD6972 Owner's Manual - page 10

9

3. Close the CD door by press the OPEN/CLOSE Area. Wait a few seconds; the number of the total 

    tracks will appear on the LCD Display.

4. Press the       /SCAN Button to start playback the first track on the disc.

5. During playback:

Turn the VOLUME Control Knob to adjust volume level as desire.

Press the         /SCAN Button to pause; press again to resume normal playback 

Press the        or         Buttons repeatedly to skip the tracks.

Press and holding the         or         Buttons to fast searching the specific section.

5. To stop CD playback, press the 

/BAND Button. The total number of tracks will appear on the 

   display.

6. When finished listening, slide the Function Selector to OFF position to power off the unit.

Programmed Playback:

Up to 20 tracks can be programmed playback as follows:

1. In CD STOP playback mode, press the M Button. "PROG 1 --"” will appear on the display and 

blinking.

2. Select the first specific track to be programmed by pressing the        or        buttons repeatedly.

3. Press the M Button to store the selected track into the memory.

4. Repeat steps 2 and 3 until all the specific tracks stored into the memory.

5. Press the>ll/SCAN Button to start program playback. The program indicator "PROG" will stop 

blinking.

6. To stop playback, press the 

/BAND Button.

7. To erase the program, press the 

/BAND Button again in stop mode. The program indicator will 

disappear on the display.

Repeat/Random Playback:

1. During playback (or program playback), press the M Button once. The repeat one indicator “REP” 

will appear on the LCD Display. The current track will playback repeatedly.

2. During playback, press the M Button twice. The repeat all indicator “REP ALL” will appear on the 

LCD Display. All the tracks on the current disc (or program) will be playback repeatedly.

3. During playback, press the M Button three times, the random indicator "RAND" will appear on the 

LCD Display. The unit will play the tracks randomly.

4. To cancel the repeat and random play functions, press the M Button repeatedly until all 

repeat/random playback indicators disappear on the LCD Display or press the 

/BAND Button to 

stop playback.

Note: Random playback is not available in program playback mode.