Magnavox MD6972 Owner's Manual - page 11
BT (BLUETOOTH):
BT pairing and play:
First time use or re-pairing the unit to a new BT Device, pair as follows:
1.Slide the Function Selector to BT/CD/AUX position to turn on the CD. The LCD Display will
illuminate and indicator “CD” will appear.
2.Press the BT/CD Button on the top of the unit to switch the unit from CD mode to BT mode:
The
Indicator on the front of unit will illuminate and blink.
Indicate “bt” will appear on the LCD Display and blink.
3.Power on the external BT Device and enter to BT searching mode. Start pairing following the on
screen instructions from the external BT Device. After paired, the indicate “bt” on the LCD Display
and
Indicator on the front of unit will stop blinking.
4.If pairing is complete you may now play music with your external BT Device.
5.During playback:
Turn the VOLUME Control Knob to adjust volume level as desire.
Press the /SCAN Button to pause; press again
to resume normal playback.
Press the or Buttons repeatedly to skip the tracks.
6. When finished listening, slide the Function Selector to OFF position to power off the unit.
Notes:
1. When the external BT Device searched the unit, ou r model number “MD6927” will appear on the
display of external BT Device.
2. If while pairing you are asked for a code please try "0000" or "1234".
Normal operation after pairing:
1. Slide the Function Selector to BT/CD/AUX position to turn on the CD. The LCD Display will
illuminate and indicator “CD” will appear.
2. Press the BT/CD Button on the top of the unit to switch the unit from CD mode to BT mode:
The
Indicator on the front of unit will illuminate and blink.
Indicate “bt” will appear on the LCD Display and blink.
3. Wait a few seconds until the unit is automatically paired to the external BT Device. The indicate
“bt” on the LCD Display and
Indicator on the front of unit will stop blinking.
4. After pairing is complete you may now play music with your external BT Device.
10