Magnavox MME-110 User Manual - page 15
15
English
8240 009 34241
CD Operations
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback.
1
Press REPEAT or SHUFFLE on the remote
control to select :
➜ SHUFFLE
– tracks of the entire disc played in
random order.
➜
(REPEAT ALL)
– to repeat the entire
disc/ program.
➜
1 (REPEAT)
– to repeat the current
track.
2
To return to normal playback, press REPEAT or
SHUFFLE until the various REPEAT/ SHUFFLE
modes are no longer displayed.
● You can also press
9 to cancel your play mode.
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 30 tracks can be stored in the
memory in any order.
1
Press PROGRAM to enter the programming
mode.
➜ A track number is shown and
PROG
flashes.
2
Press
S or T (¡ or ™) repeatedly to
select your desired track number.
3
Press PROGRAM to confirm the track number
to be stored.
➜ The last programmed tracks, the number of
tracks programmed and “
PROG” will be
displayed.
4
Repeat steps 2-3 to select and store all desired
tracks.
➜ “
FULL” is displayed if you attempt to
program more than 30 tracks.
5
To start playback of your disc program, press ÉÅ.
Note:
– During programming, if no button is pressed
within 15 seconds, the system will exit the program
mode automatically.
Reviewing the program
In stop mode, press
S or T (à or á)
until the display shows all your stored track
numbers in sequence.
Erasing the program
● Press and hold Ç when playback is stopped.
➜
PROG
disappears from the display.
Note:
– The program will be erased when the system is
disconnected from the power supply or when the
disc tray is opened.
pg 001-024/MME110/37-Eng
6/3/02, 12:49 PM
15