Magnifico MDE10 Use And Maintenance Manual - 2.11 Cooking Program
14
°C
MIN
T1
T12
T11
T16
D4
2.10 Programming cooking processes
Every single previously illustrated cooking phase,
can be memorised in order to compose a cooking
process.
Once the phase setting is complete, press the T11
Phase key and turn the M knob to right to add a
new phase. The D4 display now will visualize:
It is now possible to continue with
the set of the other cooking parameters as desired.
Proceed as above to add new phases (up to 9).
Turn the M knob to left until D4 display shows
and press the T16 Start key to
start cooking.
2.11 Cooking program
storage
88+
90
8
3:15
F A N
8 8
2
P r g
8
0 4
8 8
m e m
8
s t e p
8
2
2. Use instructions
s t e p
8
1
It is possible to save a cooking process on the oven
internal memory.
Once the desired program is created press T12 key
for some seconds. The D4 display will show the first
available program number position (ex. if there are
already 3 programs stored on the positions 1,2 and
3, it will be shown program 4 as the first available
position to save the program).
Chose the position number disired by turning to right
or to left the M knob and then press again the T12
key for some seconds to memorize the program. The
D4 display will show:
The oven allows to store up to 99 programs.