Magnifico MDE10 Use And Maintenance Manual - 2. Use Instructions
5
MAGNIFICO Use and mantenance manual
2. Use instructions
2.1 Preliminary information
The appliance has been designed to cook food in
closed premises and must only be used for this
purpose: any other different use must, therefore,
be avoided as considered improper and dangerous.
Survey the equipment during functioning.
Before cooking, we recommend pre-heating the
oven at a temperature of about +30°/+40°C higher
than that required.
Once it has been connected to the mains, the oven
is in “stand-by” condition (waiting).
The oven control panel is equipped with a knob M
to perform the insertion and modification of the
functioning parameters of the appliance. Such knob
can also be pressed to select a function or confirm
a certain parameter. The knob acts on a digital en-
coder and, therefore, is in continuous rotation (no
end run). The parameters adjusted by the encoder
vary clockwise increasingly.
In the stand-by condition, by pressing the T1 key
one switches to the “on” condition after board reset
(a few seconds). The oven is ready to receive the
cooking settings.
88+
90
°C
MIN
8
3:15
F A N
8 8
2
S T E P
8
1