Magnum 232 Operator's Manual - page 9
Original Instruction
9 / 17
1.2
Operation
a.
Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.
b.
Stop the blade(s)when crossing gravel drives, walks, or roads.
c.
After striking a foreign object, stop the motor, unplug, thoroughly inspect the mower for any damage, and repair the
damage before abnormally and operating the mower.
d.
If the equipment should start to vibrate abnormally, stop the motor and check immediately for the cause. Vibration is
generally a warning of trouble.
e.
Stop the motor and unplug whenever you leave the equipment, before cleaning the mower housing, and before making
any repairs or inspections.
f.
Shut the motor off and wait until the blade comes to a complete stop before removing the grass catcher or before
unclogging the chute.
g Mow across the face of slopes, never up and down. Exercise extreme caution when changing direction on slopes .Do not
mow excessively steep slopes. Never operate the mower without proper guards, plates, or other safety protective devices in
place.
g.
Do not wash with a hose , avoid getting water in motor and electrical connections.
1.4
Maintenance
a.
Check the blade and the engine mounting bolts at frequent intervals for proper tightness.
b.
Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working condition.
c.
Check bag frequently for deterioration and wear, and replace worn bags. Check that replacement bags comply with the
original manufacturer`s recommendations or specifications.
d.
Replace the blade if it is bent or cracked. An unbalanced blade causes vibration that could damage the motor drive unit
or cause personal injury.
e.
Sharpen a dull blade equally at each end to maintain the balance.
f.
Clear the blade thoroughly and check its balance by supporting it horizontally on a thin nail through its centre hole. The
mail should also be in a horizontal position , If either end of the blade rotates downward, remove some metal from the
heavy or lower end until the blade is balanced. It is balanced when neither end drops.
ASSEMBLY
UNPACKING
This product requires assembly.
■ Carefully remove the mower and any accessories from the box. Make sure that all items listed in the packing list are
included.
■ Inspect the mower carefully to make sure no breakage or damage occurred during shipping.
■ Do not discard the packing material until you have fully assembled and used the machine.
PACKING LIST
■ Lawn mower
■ Isolator key (item 11 in fig1)
■ Grass box (Type A or B)