Maico EC 140 B Mounting And Operating Instructions - page 11
16
1 Lift up ceiling fan.
1 Hang rubber roller of fastening rod [20] in
ceiling hook [14].
1 Undertake electrical connection according
to section 7.3.
1 Slide canopy [17] towards ceiling and lock
with setting ring [19].
7.3 Electrical connection
DANGER
Danger to life from electric
shock
1 Switch the mains fuse off.
The cable length of the motor
connection cables has also been
designed for units with the long
fastening rod.
1 Undertake electrical connection according
to wiring diagram (see rear of instructions
or inside of canopy).
7.4 Start-up
1 Switch the mains fuse on.
1 Switch ceiling fan on and off. Check
direction of rotation at same time.
EC 30 E and EC 40 D: The impeller must
turn clockwise (viewed from below).
EC 90 B and EC 140 B: The impeller must
turn anti-clockwise (viewed from below).
NOTICE
Note rotation and air direction
arrows.
1 If the rotation and air direction
is wrong, check the electrical
connection and correct if
necessary.
8. Long fastening rod
DANGER
Danger to life from electric
shock
1 Switch the mains fuse off.
DANGER
Incorrect installation results in
a danger of injury from falling
unit parts.
1 When installing and also after
dismantling, always use new
lock nuts according to ISO
7042.
If using a long fastening rod (option with
0.5 m or 1 m), the unit must be modified.
1 Modification may only be undertaken by a
trained electrician.
1 If ceiling fan has already been fitted, take it
off the ceiling.
1 Never undertake modification with fan fitted
on the ceiling and unit live.
1 The length of the connection cables is
designed ex-factory for the long fastening
rod too.
i
GB