Majestic 33BDVT Installation Instructions And Homeowner's Manual - page 36
36
BDVT Series Direct Vent Gas Fireplace
10003358
Bay window kits are available for the 33BDVT/33BDVR,
36BDVT/36BDVR & 39BDVT/39BDVR model
appliances.
When fitting the Bay Window Kits the
original window frame assembly must
remain in place. The Bay Window kit will
fit over the existing window frame
assembly.
Installation
1.
Remove the upper and lower brass window trims.
2.
Remove the existing bottom louvre assembly
complete with the hinges.
3.
Remove the top louvre assembly.
4.
Assemble the Bay Window Kit according to the
instructions supplied with the kit.
5.
Place the 2 pieces of ceramic refractory along the
base of the bay window. (Fig. 54)
6.
Hang the Bay Window Assembly over the existing
window frame assembly.
7.
Re-install the upper louvre assembly.
Do not remove the existing window
frame assembly.
Optional remote control units are available to control
different functions of the appliances
Model
Function/s Controlled
MRCI
ON/OFF
MRC2
ON/OFF and Temperature
MRC3
ON/OFF and Temperature control
with a digital display and
programmable 24 hour clock.
IMT
Wall mounted thermostat control
Remote Controls
Decorative Bay Windows
Bay Window Screen
Bay Window Screen Kits are available for the 33BDVT,
36BDVT, 39BDVT & 43BDVT model appliances.
Do not remove existing window frame
assembly! Remove all plastic from brass
trims.
1. Let the fireplace cool down if it has been operating.
2. Remove existing top louvre from fireplace by lifting
up and pulling out.
3. Hang Bay Window Screen Frame Assembly over top
of existing window frame assembly.
Either remove the top and bottom brass window trims
or take care not to scratch them during the installation
of the screen kit.
1. Slide the tabs on the top edge of the window screen
assembly up into the slots in the underside of the
top rail of the window frame assembly.
2. With the tabs in the slots, place the screen down
against the glass.
3. Slide the screen down the glass until the bottom
edge of the screen sits in the gap between the
bottom rail of the window frame and the window
doors.
To remove the screen for glass cleaning reverse
the installation procedures.
Window Frame
Assembly
Front Window Screen
FP1233
Fig. 53 Front window screen.
Top Louvre
Bay
Window
Frame
Ceramic
Refractory
Ceramic
Refractory
Screws
Bottom
Brass Trim
Bottom
Louvre
Assemblies
FP1234
Fig. 54 Bay window installation.
CFM178
Fig. 55 Bay window screen assembly.