Majestic DVD2000 User Manual - Adjusting The Volume
Turning the power on and off
Even if you turn power off or switch the ignition Key to OFF during playback or change
the video source, playback will continue from the point where playback stopped when
the power is turned ON again (except MP3 disc).
The play position memory is released if the disc is removed or the Reset switch is pressed.
Play Position Memory Function
Press POWER button
1
The power turns on.
To turn the power off, Press POWER
button for more than 1 second.
9
Adjusting the volume
4
Press the VOL+ button to increase the volume.
Press the VOL- button to decrease the volume.
Select Player , AUX1, AUX2 in turn
by pressing SOURCE button.
Player AUX1 AUX2 player
2
Switching between DVD and AUX Input
To switch between DVD and AUX1 inputs, press SOURCE button.
3
AMP Select
Press AMP SEL button on the remote repeatedly, turn on or off the external amplifier with is
connected to brown cable - remote turn-on output.
Basic Playback
Connecting the cable 3 BLUE WITH WHITE for rear view camera(see page4),
the unit will switch to DRIVER VIDEO automatically.
AUX2 is the audio input of audio system like AM/FM turner.
Screen on/off
5
Press the Screen button on the remote, turning the screen On or Off.
On: The external screen is on; Off: The external screen is off.
Note : Playing radio or CD disc, we advise to select Off mode.
1
SOURCE SEL
SOURCE CONNECT
2
3
PLAYER
AUX1
AUX2
Connect Others AV Source To
The Eye Jacks On The Front Panel
Connect Others Audio Source To
The AUX2 RCA On The Rear Panel
- NONE -
OUTPUT
Using AUDIO
and VIDEO out,
connect the
monitor or audio
system