I n s t r u c t i o n m a n u a l warning: for your personal safety, read and understand before using. Save these instructions for future reference. English angle cutter model 4112hs model 4112s model 4114s 007130 double insulation.
2 specifications • due to our continuing programme of research and development, the specifications herein are subject to change without notice. • note: specifications may differ from country to country. Symbols end201-2 the following show the symbols used for the equipment. Be sure that you understa...
3 safety instructions ena001-2 warning: when using electric tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock and personal injury. Read all these instructions before operating this product and save these instructions. For s...
4 additional safety rules for tool enb064-1 1. Always use eye and ear protection. Other per- sonal protective equipment such as dust mask, gloves, helmet and apron should be worn. 2. Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. 3. Keep guards i...
5 functional description caution: • always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Adjusting the depth of cut loosen the wing bolt on the depth guide and move the base up or down. At the desired depth of cut, secure the base by tightenin...
6 for tool with the lock on and lock-off switch to prevent the switch trigger from accidentally pulled, a lock lever is provided. To start the tool, push in the lock lever (b direction) and then pull the switch trigger. (a direction) release the switch trigger to stop. For continuous operation, push...
7 operation caution: be sure to pull the tool when cutting a workpiece. • use this tool for straight line cutting only. Cutting curves can cause stress cracks or fragmentation of the diamond wheel and abrasive cut-off wheel resulting in possible injury to persons in the vicinity. • after operation, ...
Use a screwdriver to remove the brush holder caps. Take out the worn carbon brushes, insert the new ones and secure the brush holder caps. To maintain product safety and reliability, repairs, any other mainte- nance or adjustment should be performed by makita authorized service cent- ers, always usi...
