Makita 4112HS Instruction Manual - Accessories
Use a screwdriver to remove the brush holder caps. Take out the worn carbon
brushes, insert the new ones and secure the brush holder caps.
To maintain product SAFETY and RELIABILITY, repairs, any other mainte-
nance or adjustment should be performed by Makita Authorized Service Cent-
ers, always using Makita replacement parts.
ACCESSORIES
CAUTION:
•
These accessories or attachments are recommended for use with your Makita tool specified in this manual. The
use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita service center.
Connecting to vacuum cleaner
When you wish to perform cleaner operation, connect a vacuum cleaner to
your tool. Connect a hose of vacuum cleaner to the dust nozzle via an elbow
joint (accessory).
1. Dust cover
2. Screwdriver
3. Brush holder cap
1
2
3
004020
•
Diamond wheels (Dry type)
•
Abrasive cut-off wheels
•
Socket wrench 17
•
Safety goggle
•
Ring 20
•
Elbow joint
1. Dust nozzle
2. Elbow joint
3. Hose
1
2
3
004018
Makita Corporation Anjo, Aichi, Japan
884494B221