1. DL manuals
  2. Makita
  3. Cutter
  4. 4190D
  5. Instruction Manual

Makita 4190D Instruction Manual - Maintenance

Manual is about: Cordless Cutter

Summary of 4190D

  • Page 1

    1 english ( o rigina l in st ruct ions) instruction manual warning: for your personal safety, read and understand before using. Save these instructions for future reference. Cordless cutter 4190d 003503.

  • Page 2: Specifications

    2 english specifications model 4190d wheel diameter 80 mm 90° 0 - 18 mm cutting depth 45° 0 - 16 mm no load speed (min -1 ) 1,000 overall length 313 mm net weight 1.9 kg rated voltage d.C. 9.6 v • due to our continuing programme of research and development, the specifications herein are subject to c...

  • Page 3: Cordless Cutter Safety

    3 personal safety 10. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. ...

  • Page 4

    4 2. Always use guard provided with the tool. The guard must be securely attached to the power tool and positioned for maximum safety, so the least amount of wheel is exposed towards the operator. The guard helps to protect operator from broken wheel fragments and accidental contact with wheel. 3. U...

  • Page 5: Save These Instructions.

    5 1. Maintain a firm grip on the power tool and position your body and arm to allow you to resist kickback forces. Always use auxiliary handle, if provided, for maximum control over kickback or torque reaction during start-up. The operator can control torque reactions or kickback forces, if proper p...

  • Page 6: Functional Description

    6 tips for maintaining maximum battery life 1. Charge the battery cartridge before completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power. 2. Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life. ...

  • Page 7: Assembly

    7 note: • when making bevel cuts, view the cutting line on the workpiece through the window in the blade case in order to cut more accurately. If you have difficulty seeing it because of the water tank, adjust the position of the tank by tilting it backward slightly. Switch action 1 2 003522 caution...

  • Page 8: Operation

    8 1 003539 connect the cap on the end of the polyvinyl tube to the mouth of the tank. Turn the tank clockwise when making the connection. Then tighten the screw (a) securely to secure the tank. 003541 caution: • if you find the polyvinyl tube is bent like a "v" or has been strained excessively after...

  • Page 9: Maintenance

    9 maintenance caution: • always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. After use brush off accumulation of dust on the base. To maintain product safety and reliability, repairs, any other maintenance or adjus...

  • Page 10

    10

  • Page 11

    11.

  • Page 12

    12 makita corporation 883627i9.