Makita 6017D Instruction Manual - Specific Safety Rules
4
22. When servicing a tool, use only
identical replacement parts. Follow
instructions in the Maintenance
section of this manual. Use of
unauthorized parts or failure to follow
Maintenance instructions may create a
risk of shock or injury.
USB022-2
SPECIFIC SAFETY RULES
DO NOT let comfort or familiarity with
product (gained from repeated use)
replace strict adherence to cordless drill
safety rules. If you use this tool unsafely
or incorrectly, you can suffer serious
personal injury.
1. Hold tool by insulated gripping
surfaces when performing an
operation where the cutting tool
may contact hidden wiring. Contact
with a "live" wire will also make
exposed metal parts of the tool "live"
and shock the operator.
2. Be aware that this tool is always in
an operating condition, because it
does not have to be plugged into an
electrical outlet.
3. Always be sure you have a firm
footing.
4. Be sure no one is below when using
the tool in high locations.
5. Hold the tool firmly.
6. Keep hands away from rotating
parts.
7. Do not leave the tool running.
Operate the tool only when
hand-held.
8. Do not touch the drill bit or the
workpiece immediately after
operation; they may be extremely
hot and could burn your skin.
9. Some material contains chemicals
which may be toxic. Take caution to
prevent dust inhalation and skin
contact. Follow material supplier
safety data.
SAVE THESE
INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety
rules stated in this instruction manual
may cause serious personal injury.
USD301-1
Symbols
The followings show the symbols used for
tool.
・ volts
・ direct current
・ no load speed
・ revolutions or reciprocation per
minute
ENC004-1
IMPORTANT SAFETY
INSTRUCTIONS
FOR BATTERY
CARTRIDGE
1. Before using battery cartridge, read
all instructions and cautionary
markings on (1) battery charger, (2)
battery, and (3) product using
battery.
2. Do not disassemble battery
cartridge.
3. If operating time has become
excessively shorter, stop operating
immediately. It may result in a risk
of overheating, possible burns and
even an explosion.