Makita 8414D Instruction Manual - Specifications
4
ENGLISH
Explanation of general view
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END004-2
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
..... Read instruction manual.
ENE039-1
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
GEA006-2
General Power Tool Safety
Warnings
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
1.
Button
2.
Battery cartridge
3.
Switch trigger
4.
Reversing switch lever
5.
Speed change lever
6.
Action mode change lever
7.
Arrow
8.
Adjusting ring
9.
Graduations
10. Steel band
11. Grip base
12. Side grip
13. Protrusion
14. Groove
15. Sleeve
16. Bit
17. Bit holder
18. Depth rod
19. Clamp screw
20. Limit mark
21. Brush holder cap
22. Screwdriver
Model
8414D
8434D
8444D
Capacities
Concrete
13 mm
14 mm
16 mm
Steel
13 mm
13 mm
13 mm
Wood
45 mm
50 mm
65 mm
Wood screw
6 mm x 75 mm
6 mm x 75 mm
10 mm x 89 mm
Machine screw
6 mm
6 mm
6 mm
No load speed (min
-1
)
High (3)
0 - 1,600
0 - 1,700
0 - 1,700
Medium (2)
0 - 550
0 - 600
0 - 600
Low (1)
0 - 300
0 - 300
0 - 300
Blows per minute (min
-1
)
High (3)
0 - 24,000
0 - 25,500
0 - 25,500
Medium (2)
0 - 8,250
0 - 9,000
0 - 9,000
Low (1)
0 - 4,500
0 - 4,500
0 - 4,500
Overall length
259 mm
259 mm
259 mm
Net weight
2.4 kg
2.4 kg
2.7 kg
Rated voltage
D.C. 12 V
D.C. 14.4 V
D.C. 18 V