1 english ( o rigina l in st ruct ions) instruction manual warning: for your personal safety, read and understand before using. Save these instructions for future reference. Cordless hammer driver drill bhp444 bhp454 008997.
2 english specifications model bhp444 bhp454 concrete 14 mm 16 mm steel 13 mm 13 mm wood 50 mm 65 mm wood screw 6 mm x 75 mm 10 mm x 89 mm capacities machine screw 6 mm high (2) 0- 1,700 no load speed (min -1 ) low (1) 0 - 400 high (2) 0 - 25,500 blows per minute (min -1 ) low (1) 0 - 6,000 overall ...
3 enh101-12 ec declaration of conformity we makita corporation as the responsible manufacturer declare that the following makita machine(s): designation of machine: cordless hammer driver drill model no./ type: bhp444,bhp454 are of series production and conforms to the following european directives:...
4 jewellery or long hair can be caught in moving parts. 16. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. Power tool use and care 17. Do not force the powe...
5 this instruction manual may cause serious personal injury. Enc007-4 important safety instructions for battery cartridge 1. Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 2. Do not disassemble battery...
6 when released. To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop. Lighting up the front lamp 1 008998 caution: • do not look in the light or see the source of light directly. Pull the switch t...
7 second at the " " position, then stop the tool and slide to your desired position. Caution: • always set the lever correctly to your desired mode mark. If you operate the tool with the lever positioned halfway between the mode marks, the tool may be damaged. Adjusting the fastening torque 1 2 3 00...
8 hook 1 2 3 008995 the hook is convenient for temporarily hanging the tool. This can be installed on either side of the tool. To install the hook, insert it into a groove in the tool housing on either side and then secure it with a screw. To remove, loosen the screw and then take it out. Operation ...
9 • there is a tremendous force exerted on the tool/bit at the time of hole break through. Hold the tool firmly and exert care when the bit begins to break through the workpiece. • a stuck bit can be removed simply by setting the reversing switch to reverse rotation in order to back out. However, th...
10 reinstall the rear cover and tighten two screws securely. To maintain product safety and reliability, repairs, any other maintenance or adjustment should be performed by makita authorized service centers, always using makita replacement parts. Accessories caution: • these accessories or attachmen...
11.
12 makita corporation anjo, aichi, japan 884812a223.
