Makita BHP343 Instruction Manual - Specifications
2
ENGLISH
SPECIFICATIONS
Model BHP343
BHP453
Concrete
10 mm
13 mm
Steel
10 mm
13 mm
Wood
25 mm
36 mm
Wood screw
5.1 mm x 63 mm
6 mm x 75 mm
Capacities
Machine screw
6 mm
High (2)
0- 1,300
No load speed (min
-1
)
Low (1)
0 - 400
High (2)
0 - 19,500
Blows per minute (min
-1
)
Low (1)
0 - 6,000
Overall length
211 mm
232 mm
Net weight
1.4 Kg (BL1415)/1.6 Kg (BL1430)
1.7 Kg (BL1815) /1.9 Kg (BL1830)
Rated voltage
D.C. 14.4 V
D.C. 18 V
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
END004-2
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
・ Read instruction manual.
・ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE039-1
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
For Model BHP343
ENG101-1
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-1:
Sound pressure level (L
pA
) : 80 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
ENG203-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745-2-1:
Work mode: impact drilling into concrete
Vibration emission (a
h,ID
) : 10 m/s
2
Uncertainty (K) : 2.5 m/s
2
ENG302-1
Work mode : drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
For Model BHP453
ENG101-1
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-1:
Sound pressure level (L
pA
) : 78 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
ENG203-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745-2-1:
Work mode: impact drilling into concrete
Vibration emission (a
h,ID
) : 7.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG302-1
Work mode : drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less