Makita DA3010 Instruction Manual - Specifications
3
ENGLISH (Original instructions)
Explanation of general view
1-1. Lamp
1-2. Speed control screw
1-3. Switch lever
1-4. Higher
1-5. Lower
2-1. Reversing switch lever
3-1. Lamp
3-2. Speed control screw
3-3. Switch lever
3-4. Higher
3-5. Lower
5-1. Chuck key
6-1. Sleeve
6-2. Ring
7-1. Gripping part
7-2. Side grip (handle)
SPECIFICATIONS
Model DA3010
DA3010F
DA3011
DA3011F
Steel
10 mm
10 mm
10 mm
10 mm
Capacities
Wood
25 mm
25 mm
25 mm
25 mm
No load speed (min
-1
)
0 -2,400
0 -2,400
0 -2,400
0 -2,400
Overall length
270 mm
270 mm
270 mm
270 mm
Net weight
1.6 kg
1.6 kg
1.6 kg
1.6 kg
Safety class
/II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE032-1
Intended use
The tool is intended for drilling in wood, metal and plastic.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
ENG102-3
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 81 dB(A)
Sound power level (L
WA
) : 92 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG202-3
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
ENH101-13
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Angle Drill
Model No./ Type: DA3010,DA3010F,DA3011,DA3011F
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd,
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
30th January 2009
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
GEA010-1
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.