Makita DUC252 Instruction Manual - Specifications
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model
DUC252
DUC302
Guide bar length
250 mm
300 mm
Cutting length
23 cm
24 cm
28 cm
Standard guide bar
Type
Sprocket nose bar
Carving bar
Sprocket nose bar
Type
91PX
25AP
90PX
Pitch
9.5 mm (3/8")
6.35 mm (1/4")
9.5 mm (3/8")
Gauge
1.3 mm (0.05")
1.3 mm (0.05")
1.1 mm (0.043")
Standard saw chain
No. of drive links
40
60
46
Number of teeth
6
9
6
Sprocket
Pitch
9.5 mm (3/8")
6.35 mm (1/4")
9.5 mm (3/8")
Overall length (without guide bar)
316 mm
*1
4.1 kg
Net weight
*2
4.6 kg
4.7 kg
Chain speed per minute
8.3 m/s (500 m/min)
Chain oil tank volume
85 cm
3
Rated voltage
D.C. 36 V
D.C. 36 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
*1 Weight, with largest battery cartridge, without guide bar and chain, empty oil tank, according to EN ISO 11681-2.
*2 Weight, with battery cartridge, guide bar, and chain, filled oil tank, according to EPTA-Procedure 01/2003.
WARNING: Use appropriate combination of the guide bar and saw chain. Otherwise personal injury may result.
END313-1
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
Wear eye protection.
Wear ear protection.
Wear a helmet, goggles and ear
protection.
Use appropriate protection for foot-leg
and hand-arm.
This saw is to be used by properly
trained operators only.
Do not expose to rain.
Maximum permissible cut length
Direction of chain travel
Saw chain oil adjustment
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws,
electric equipment and batteries and
battery pack(s) that have reached the
end of their life must be collected
separately
and
returned
to
an
environmentally compatible recycling
facility.
ENE090-1
Intended use
The tool is intended for cutting branches / pruning trees.
It is also suitable for tree service.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA
) : 84.4 dB (A)
Sound power level (L
WA
) : 95.4 dB (A)
Uncertainty (K) : 2.5 dB (A)
Wear ear protection
Cd
Ni-MH
Li-ion