1 english ( o rigina l in st ruct ions) instruction manual important: read before using. Cordless jig saw jv100d 012311.
2 english (original instructions) specifications model jv100d length of stroke 18 mm strokes per minute (min -1 ) 0 - 2400 blade type b type wood 65 mm mild steel 2 mm max. Cutting capacities aluminum 4 mm overall length 231 mm net weight 1.7 kg rated voltage d.C. 10.8 v • due to our continuing prog...
3 enh101-15 for european countries only ec declaration of conformity we makita corporation as the responsible manufacturer declare that the following makita machine(s): designation of machine: cordless jig saw model no./ type: jv100d are of series production and conforms to the following european di...
4 15. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. 16. If devices are provided for the connection of dust extraction and collection facilities, ensure these a...
5 13. Do not operate the tool at no-load unnecessarily. 14. Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety data. 15. Always use the correct dust mask/respirator for the material and application you are wo...
6 functional description caution: • always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1 2 012335 • always switch off the tool before installing or removing of the battery cartr...
7 caution: • before installing the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "off" position when released. • when not operating the tool, depress the lock-off button from a side to lock the switch trigger in the off position. To...
8 operation caution: • always hold the base flush with the workpiece. Failure to do so may cause blade breakage, resulting in a serious injury. • advance the tool very slowly when cutting curves or scrolling. Forcing the tool may cause a slanted cutting surface and blade breakage. 1 2 012319 turn th...
9 b) plunge cutting 012325 you need not bore a starting hole or make a lead-in cut if you carefully do as follows. (1) tilt the tool up on the front edge of the base with the blade point positioned just above the workpiece surface. (2) apply pressure to the tool so that the front edge of the base wi...
10 2. Circular cuts when cutting circles or arcs of 170 mm or less in radius, install the rip fence as follows. 1 2 3 4 012330 insert the rip fence into the rectangular hole on the side of the base with the fence guide facing up. Insert the circular guide pin through either of the two holes on the f...
11.
12 makita corporation anjo, aichi, japan www.Makita.Com 885079-226.
