Makita UC3030A Instruction Manual - page 3
3
Packing/Disposal
The MAKITA electric chain saw will be delivered in a protective
cardboard box to prevent transport damages.
Cardboard is a basic raw material and is therefore consequently
reuseable or suitable for recycling (waste paper recycling).
Be a good steward of the environment! Do not dispose of electrical
appliances with the household trash!
If the saw is no longer operable or repairable, ask the appro-
priate waste disposal authority about the proper means of dis-
posal.
In order to preclude any hazard to other persons from a de-
fective electrical appliance, cut off the power cord next to the
housing.
CAREFUL! Before cutting off the power cord, pull the
plug. Otherwise you can be exposed to a life-threatening
shock!
Intended use
Electric saws
This electric saw may be used only for sawing wood. It is in-
tended for occasional use in thin wood, caring for fruit trees,
felling, removing limbs, and trimming to length.
Persons who may not sue the saw:
This saw must not be used by persons who are not familiar with
this instruction manual, children, young people, or anyone un-
der the influence of alcohol, drugs or medication.
1
2
3
4
5
Minimum delivery inventory
1. Electric chain saw
2. Guide bar
3. Saw chain
4. Cord grip for electric cord
5. Chain protection cover
6. Instruction manual (not shown)
In the case that one of the parts listed should not be included in
the delivery inventory, please, consult your sales agent.
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible manufacturer
declare that the following Makita machine(s):
Designation of Machine: Chain Saw
Model No./ Type: UC3030A, UC3530A, UC4030A, UC4530A,
UC3530AP, UC4030AP
Specifications: see “TECHNICAL DATA” table.
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The EC-Type Examination Certificate No.
M6A 12 10 26932 043
M6A 12 10 26932 044
The EC-Type Examination per 98/37/EC and
2006/42/EC was performed by:
TÜV SÜD Product Service GmbH,
Ridlerstraße 65, 80339 MÜNCHEN, Germany
Identification No. 0123
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.,
Michigan, Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
The conformity assessment procedure required by Directive
2000/14/EC was in Accordance with annex V.
Measured Sound Power Level: 101.8 dB
Guaranteed Sound Power Level: 103 dB
7.11.2012
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN