Makita UC3050A Instruction Manual - Specifications
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model
UC3050A
UC3051A
UC3550A
UC3551A
UC4050A
UC4051A
UC4550A
UC4551A
Max. chain speed
14.5 m/s (880 m/min)
Bar length
300 mm
350 mm
400 mm
450 mm
Cutting length
260 mm
320 mm
355 mm
415 mm
Standard guide
bar
Guide bar type
Sprocket nose bar
Type 91PX
Pitch 3/8"
Standard saw
chain
No. of drive links
46 52 56 62
Recommended guide bar length
300 - 450 mm
Overall length (without guide bar)
505 mm
Net weight
5.4 kg
5.5 kg
5.5 kg
5.6 kg
5.7 kg
Extension cable (optional)
DIN 57282/HO 7RN -F L=30 m max.,3x1.5 mm
2
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END218-7
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
・ Read instruction manual and follow the
warnings and safety instructions.
・ Wear eye protection.
・ Wear ear protection.
・ DOUBLE
INSULATION
・ Caution: particular care and attention
required!
・ Caution: withdraw the mains plug
immediately if the cable is damaged!
・ Caution:
kickback!
・ Protect against rain and damp!
・ Wear a helmet, goggles and ear
protection!
・ Wear
safety
gloves!
・ Withdraw the mains plug!
・ First
aid
・ Maximum permissible length of cut
・ Direction of chain travel
・ Chain
oil
・ Chain brake released
・ Chain brake applied
・ Prohibited!
・ Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of the European
Directive, on Waste Electric and
Electronic Equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE031-3
Intended use
The tool is intended for cutting lumbers and logs.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.