Medtronic guardian Getting Started Manual - page 23
Appendix | 21
Medtronic Diabetes does not recommend cleaning the MiniLink transmitter after each sensor use.
caution: The MiniLink charger and test plug are not waterproof and should not be
immersed in water.
If the MiniLink transmitter needs cleaning, follow these steps:
• Attach the test plug to the Minilink transmitter to help prevent water, soap and sanitizer
from damaging the connector pins inside the MiniLink transmitter. Do not expose the
connector pins to liquids.
• Wipe the Minilink transmitter with a dampened cloth and mild liquid soap.
• Remove the soap using warm tap water. Be sure not to let water enter the
MiniLink transmitter connection point.
• Wipe the Minilink transmitter surface with anti-bacterial hand sanitizer.
• Wipe the Minilink transmitter with a dry cloth and air dry for three minutes.
Appendix: Cleaning Your MiniLink
®
Transmitter