MEGAPLUS GigE Vision Features Manual - page 15
MEGAPLUS
GigE Vision Features Guide (Customer Edition)
4411-0128, Rev. A
07/28/09
11
Height: (R/W) This feature represents the actual image height transmitted by the camera (in
pixels). Min: 1, Max: Sensor height
PixelCoding: (Read) This feature indicates the coding of the pixels in the image. Raw gives the
data in the native format of the sensor. It is mainly used for Bayer sensor. This value must
always be coherent with the PixelFormat feature.
PixelColorFilter: (Read) This feature indicates the type of color filter that is applied to the
image. This value must always be coherent with the PixelFormat feature.
PixelFormat: (R/W) This feature indicates the format of the pixel to use during the acquisition.
Values of the enumeration and the pixel formatting correspond to the GigE Vision
specification. It contains all the information provided by PixelCoding, PixelSize,
PixelColorFilter but combined in one single value.
PixelSize: (Read) This feature indicates the total size in bits of a pixel of the image. This value
must always be coherent with the PixelFormat feature.
SensorDigitzationTaps: (R/W) This feature represents the number of digitized samples output
simultaneously by the camera A/D conversion stage.
SensorHeight: (Read) This feature indicates the effective height of the sensor in pixels. Its
value must be greater than 0. For linescan sensor, this value is 1. Min:0, Max: full height of
the sensor.
SensorWidth: (Read) This feature indicates the effective width of the sensor in pixels. Min:0,
Max: full width of the sensor.
TestImageSelector: (R/W) This feature selects the type of test image that is transmitted by the
camera. TestImageSelector can take any of the following values:
• Off: Image is coming from the sensor.
• IPEnginetestPattern: Image is filled with a repetitive pattern.
Width: (R/W) This feature represents the actual image width transmitted by the camera (in
pixels). Min: 1, Max: Sensor width