Megxon TX4000 User Manual - page 11
11
Yes on the screen and then press the OK
button to erase all of your pictures.
If you change your mind and do not want
to continue deleting all the pictures, press
or
to select Cancel on the menu
screen. Then press the OK button. All
your pictures will be retained.
• Step 6 After all the pictures have been
deleted, there is a message appeared: No
pictures in memory.
Switch the camera to Still Capture mode to
take more photos.
Camea Settings
Using the default camera settings,
sometimes, the picture quality may not
come out the way you want it. Different
lighting environments usually produce
different results. To come up an ideal output
quality of your pictures, adjust the camera
settings to suit your needs.
Adjusting Personal Settings
This section shows you how to change the
camera settings according to your
prefereces with the following options before
start taking photos:
• Date & Time - Choose the format of
date and time for the photos you takes.
After the Date & Time Setup screen is
displayed, press
button to adjust
the date and time fields. And press OK
to confirm the above settings you adjust.
• TV Mode - Choose the TV standard
NTSC / PAL that you use in your
country for the video you record.
NTSC - Used in most countries except
Europe. USA and Japan use NTSC.
PAL - used in European countries and
Mainland China.
• Language - Let you to choose English
for your Camera menu.
• Sound - Select to have the beep sound
whenever you press the buttons of the
camera.
Customize Your Own Photo
Settings
The camera settings in Capture menu allow
you to customize your camera for more
control of your picture results.
• Step 1 Switch the camera to Capture
mode.
• Step 2 Press Menu button to bring up the
Capture menu screen.
• Step 3 The Camera menu then appears
on the LCD display.