Megxon TX4000 User Manual - page 12
12
The Camera menu lists the followings:
• Flash Mode - There are four different
options availablet: Auto, On, Off and Red
Eye Reduction. Select Red Eye
Reduction to remove the “red eye”
created by camera flashes in your photo.
• EV (Compensation) - Sets the exposure
setting to control the brightness of
photos. Choose a positive value to
have brighter photos, or a negative
value to have darker photos.
• WB (White Balance) - Allows the
camera to adjust to light conditions using
preset selections (Auto, Daylight,
Cloudy, Fluorescent, Tungsten).
• Step 5 Press OK to choose a setting.
Printing Photos
By selecting DPOF option in Playback
Menu, camera can directly send your
selected photo to the compatible printers
that read DPOF (Digital Print Order
Format).
• Step 1 First of all, press
button
until you see the photo you want to print.
• Step 2 Press Menu/OK button to
activate the Playback Menu.
Step 3 Choose DPOF Current to print
the selected photo or DPOF ALL to print
all the photos stored in the memory.
• Step 4 To cancel printing the selected
photo, choose Cancel Current DPOF.
Cancel All DPOF disregards the print
order for all photos in the memory card.
Notes: Either DPOF All or Cancel All
DPOF is selected, a meesage: "Set All
DPOF" or "Clear All DPOF" will be
shown on the screen.